Red Bull style can cooler backpack designed for DIGITS, concept render at an outdoor event

Red Bull Style Can Cooler Backpack: Designing a 24-Can Cooler for DIGITS

Design case study / Red Bull style can cooler backpack

DIGITS is a functional energy drink brand with four flavours and one tagline: Fuel your next move. They wanted a Red Bull style can cooler backpack of their own, for their team and their fans to carry to festivals, gyms and sampling events. Here is how we took it from a Red Bull reference photo to a working 24-can prototype.

24 to 26Cans carried cold
19 x 10 inHeight x diameter
10Design options presented
4Pantone matched charms

The brief

DIGITS sent us photos of the Red Bull can cooler backpack. You have seen it at festivals and sampling stalls: a silver and blue bag shaped like a giant can, with a zip lid on top and padded straps on the back. It works because people spot it from across a crowd and remember the brand.

DIGITS wanted the same impact for their own drink. Not a copy. A Red Bull type bag built around their cans, their mascot and their four flavours: Yuzu Basil, Watermelon Cranberry, Ginger Lime and Pomegranate Hibiscus.

The requirements were clear:

  • Carry a full day of sampling stock and keep it cold.
  • Sit comfortably on the back with more than 6 kg of full cans inside.
  • Read as DIGITS from across a festival ground, day or night.
  • Give fans a reason to keep it after the event.

Red Bull style, built for DIGITS

We kept what makes the Red Bull can backpack work. We changed everything tied to another brand.

We kept Can-shaped cylinder body, zip-around top lid, insulated main compartment, padded straps with reflective strips
New finish Matte black PU with reflective print, in place of a printed can graphic
New size Built around the DIGITS 250 ml can, 24 to 26 cans
New back Flat padded back panel with 3D air mesh, chest buckle and waist belt
New branding Running mascot, three ingredient icons, four flavour charms and an embossed D on the lid
Night visibility 3 mm reflective piping on the lid and both gussets

Why this was a complex build

A cylinder does not want to sit on your back. The round body has to meet a flat, padded back panel without collapsing or twisting under load. The insulation has to hold its shape so cans stack in clean layers. The branding has to work on a curved surface, on two side gussets, on the lid and on the straps. And the whole thing has to go through a sewing line, not a mould shop.

We broke the product into components and gave DIGITS options for each one, so every decision was made on paper before a single panel was cut.

1. Front panel and print method

The first decision was how the DIGITS wordmark and running mascot go on the body. We drew two versions. One uses HD reflective print with reflective piping on the top and sides, so the backpack lights up under stage lights and car headlights. The other uses HD digital print for a cleaner matte look at a lower cost.

DIGITS cooler backpack front and back views, reflective print and digital print options
Front and back views. Left: reflective print with reflective piping. Right: HD digital print.

2. Side gussets

The side gussets carry the product story. The left gusset holds three icons: blend of herbs, no added sugar and natural caffeine from green coffee beans. The right gusset holds a set of four silicone flavour charms on a D-ring. We showed both gussets with and without reflective piping.

DIGITS cooler backpack side gusset options with icons and silicone charms
Option 1 with reflective piping on the gussets. Option 2 without.

3. Lid and base

The lid is the first thing people see when the bag opens at a stall. We gave DIGITS three routes: a heat embossed D on the top panel, a lid with reflective piping, and a plain lid. The embossed D measures 3 x 3 inches at 0.5 mm depth. The base uses rubberised fabric, with an option for four rubber feet so the bag stands on wet ground without soaking through.

DIGITS cooler backpack top lid and base options with heat embossed D
Three lid and base combinations, top and bottom views.

4. The inside decides the outside

We designed the interior first and let it set the external size. The main compartment uses food grade insulated PEVA lining with stitching all around to hold the cold. Our first layout stacked 24 slim cans in three layers of eight.

DIGITS cooler backpack insulated interior holding 24 cans in three layers
Interior views, empty and loaded with 24 cans.

We then reworked the layout around the exact DIGITS 250 ml can, 13.4 cm tall and 5.34 cm wide. The final arrangement is four across, two deep and three high. This gives 24 cans as standard, with room for two more on top. The external size settled at 19 x 10 x 7.5 inches.

DIGITS 24 to 26 can backpack specification sheet with can arrangement
Specification sheet for the 24 to 26 can version, with the can arrangement drawn to scale.

5. Flavour charms

The charms give fans something to collect. Each one is 35 mm round and 8 mm thick, with the mascot in 3D rubber relief and a number for each flavour. Colours are matched to Pantone: P 381 C, P 192 C, P 2010 C and P 3546 C. We designed three attachment options. The one shown uses a black silicone strap. It snaps closed through a D-ring and carries no branding on the back.

DIGITS silicone flavour charms in four Pantone colours
Silicone charm set with size view and snap strap attachment.

6. The technical drawing

Every approved choice went into one technical drawing. This sheet is what the pattern room cuts from. It carries every view, every dimension and the full material list.

DIGITS cylindrical backpack cooler technical drawing with dimensions and materials
Technical drawing: front, back, both gussets, top, base, interior and detail callouts.
External size 19 in H x 10 in W x 7.5 in D (48.3 x 25.4 x 19.1 cm)
Capacity 24 x 250 ml cans, 26 with reduced clearance
Outer Premium PU and polyester
Lining Food grade insulated PEVA
Closure Top zipper with double DIGITS branded pullers
Carry system Padded adjustable shoulder straps, chest buckle, waist belt, cushioned top handle
Back panel 3D air mesh with ventilation channels
Base Reinforced, with rubber feet
Reflective piping 3 mm, on the top flap and both gussets
Logo Heat embossed D on the top flap

7. Checking scale before sampling

A backpack holding 26 cans is big. Before cutting fabric, we placed the design on a 5 ft 11 in and a 5 ft 6 in figure to check proportion. It let DIGITS see the size on both men and women and sign off the dimensions with confidence.

DIGITS cooler backpack scale render on two models
Concept render used to check scale on two body heights.

8. The first prototype

With the drawing approved, our sample room built the first prototype. This round tests structure, insulation and carry before any branding goes on. You see the round body holding its shape, the reflective piping running down the front, the padded straps and the full insulated compartment.

First DIGITS cooler backpack prototype, front with reflective piping First DIGITS cooler backpack prototype, back panel and straps
DIGITS prototype with lid open showing the insulated main compartment DIGITS prototype insulated lining close up
Prototype walkthrough from our sample room.

What DIGITS received

  • Concept renders to present the idea internally.
  • Ten design options across print, gussets, lid, base and charms.
  • A to-scale interior layout built around their own can.
  • A full technical drawing with dimensions, materials and Pantone references.
  • A charm design ready for silicone moulding.
  • A physical prototype from our own sample room.

Four lessons for your next merch build

Start with what goes inside

The can size set every other number on this product. Measure your contents first. Design the shell around them second.

Split the product into components

Options per component make decisions fast. DIGITS chose a print method, a gusset, a lid and a charm one at a time, with no full redesigns.

Decide the print method early

Reflective and digital print change your cost, your lead time and how the product looks at night. Lock it before sampling.

Check scale on a body

A cooler for 26 cans looks different on a person than on a table. A scale render costs a day. A wrong-sized sample costs weeks.

Want a Red Bull type cooler backpack for your brand?

Energy drink, beer, soda, water and coffee brands all use can-shaped cooler backpacks for sampling. To start one for your brand, send us:

  • Your can or bottle size, or a sample.
  • How many units the bag should carry.
  • Where it will be used: events, gyms, delivery or retail.
  • Your logo files and brand colours.
  • Your target quantity and the date you need them.

We reply within 24 hours with a design direction, a timeline and the next step. Development fees come off your production invoice when you order bulk.

Building merch your fans keep?

Send us a sketch, a reference photo or two lines of description. You get a reply within 24 hours, from the team who will draw it and build it.

Send your briefSee Optima Studio

Client: DIGITS. Shared with the client's permission. Lifestyle and scale images are concept renders. Prototype photos and video are from our sample room. Red Bull is a registered trademark of Red Bull GmbH. Optima Bags and DIGITS are not affiliated with or endorsed by Red Bull. We mention it to describe the design reference.

Back to blog
New Service

Turn Your Bag Idea Into a
Factory-Ready Spec Sheet

Got a concept — a sketch, a ChatGPT image, a reference bag? Our 30-year manufacturing team turns it into a complete tech pack. Factory-backed, ISO certified, starting at $360.

2-Week Turnaround You Own All Files Free Consultation
Explore Tech Pack Service → Fee credited in full if you manufacture with us